specifications pin material: brass alloy 360, 1/2 hard dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 order code: xxxx - x - xx - xx - 00 - 00 - 01 - 0 basic part # specify pin finish: 01 200 " tin/lead over nickel 15 10 " gold over nickel 21 20 " gold over nickel mill-max-mfg.corp., p.o. box 300, 190 pine hollow road, oyster bay, ny 11771-0300.tel: 516-922-6000 fax: 516-922-9253 185 1096-x-05-xx-00-00-01-0 press-fit in .057 mounting hole 1096 1093-0-05-xx-00-00-01-0 press-fit in .056 mounting hole 1093 1092-0-05-xx-00-00-01-0 press-fit in .056 mounting hole 1092 0730-3-05-xx-00-00-01-0 press-fit in .057 mounting hole 0730 1068-0-23-xx-00-00-01-0 press-fit in .057 mounting hole 1068 1106-x-23-xx-00-00-01-0 press-fit in .057 mounting hole 1106 1122-0-22-xx-00-00-01-0 press-fit in .053 mounting hole 1122 107x-x-23-xx-00-00-01-0 press-fit in .057 mounting hole 1070 ? ? 1072 1064-0-23-xx-00-00-01-0 press-fit in .056 mounting hole 1064 wrapost terminals basic part number 1096-2 1096-3 wrapost length a .381 .527 # of wraps 2 3 basic part number 1106-2 1106-3 wrapost length a .370 .510 # of wraps 2 3 basic part number 1072-1 1071-2 1070-3 wrapost length a .260 .370 .510 # of wraps 1 2 3
|
